H2 Hydrogen bottle 420 ml

PlanetsOwn H2 Bottle Hydrogen is a sleek and stylish water bottle that makes it easy to create your own hydrogen water at home. Through an electrolysis process in the bottle, hydrogen molecules are added to the water, resulting in pure, odorless, and tasteless water that is safe to drink for both adults and children. All you need to do is fill the bottle with water, connect the included USB cable, and wait until the water is charged with hydrogen and ready to consume.

The bottle is designed with elegant stainless steel and glass and comes in a stylish gift box.

Why drink hydrogen-enriched water?

Hydrogen-enriched water has become increasingly popular in recent years, especially in countries like Japan and South Korea, due to its potential health benefits. In Japan, hydrogen water has been on the market for several years and has become a part of many people's daily routines, mainly because of its claimed health advantages.

Please note that hydrogen water should be consumed immediately after preparation to maintain its benefits.

• Capacity: 420 ml
• Material: Stainless Steel - Borosilicate Glass
• Size: 70x240mm
• Weight: 850g
• USB Charger: 5V1A - also compatible with phone chargers
• ORP: -300 to -400
• RH Value: 700-800
• Battery Capacity: 1000 mAh
• Warranty: 1-year warranty from the date of purchase

Instructions:

1. Unscrew the top and rinse the bottle before use. Important! When unscrewing the lid, hold the glass instead of the bottom part! Otherwise, the bottom part may accidentally loosen, causing the gasket to be misplaced or pinched.
2. Connect the USB cable to the socket at the bottom of the bottle (5V1A - also compatible with phone chargers).
3. While charging, the light is red; when fully charged, it turns green. (Do not keep water in the bottle during charging). Unplug the cable when the bottle is fully charged.
4. The first time, fill the bottle with regular tap water to check functionality. After that, use water from a water purifier that does not remove minerals and salts. Water filters from PlanetsOwn work perfectly.
5. Press the start button, and the bottle will light up blue. The production process begins. You will see small bubbles forming, creating a misty effect. When the bottle is fully saturated with hydrogen, the process will automatically stop, and the blue light will turn off.
6. Consume the hydrogen-filled water within 30 minutes, as the hydrogen concentration decreases over time.
7. Empty the bottle and refill it with fresh water before starting the process again. Do not reuse the same water, as this can damage the processor.
8. Important! If using water that lacks minerals and salts, the process will not start, as the water needs to conduct electricity. This includes distilled water, RO water, or extremely purified water. If this happens, add approximately 100 ml of regular tap water to make it work.
9. Recharge if needed. Charging takes about 3.5 hours, and do not interrupt the charging process before it is fully completed.
10. If using hard water (high in calcium, etc.), it may cause deposits on the electrode surface. Do not scrape the surface! Instead, clean it with citric acid or white vinegar.

Download a PDF with instructions and specifications here.